How Totech news

How to Port Forward Without Router Access? Easy Tips!!!

To connect to the CCTV DVR of your home security system from your mobile, you are getting the support of the port forwarding technique. Here the online connection is presented with the router. How to port forward without router access? Is it possible? Let’s get a clear clarification on this fact.

Not all strange devices are welcomed by a router initially, as every network is protected with a firewall. Port forwarding that is also known as port mapping, means the path that creates the connection between the external devices to reach the devices of a private network (Local Area Network). 

If the connection is made via a router, the target device sends a request to the router after the request is made by the external device, with an assigned port and the internal IP address. Local port forwarding is used when receiving data from an external device via a third-party device. Remote port forwarding makes a computer accessible to any external device. Dynamic port forwarding maps any device of your private network with any port from the remote connection that you are making the connection with. 

How to Port Forward Without Router Access?

When connecting a visitor device to your LAN, you will have to enter the IP address for the device in your router in the static form to avoid any other non-permitted entries to your network. If you are hosting a website in your office and need the external devices of the clients to access it, you can get the help of port forwarding. A separate tab has been offered with every router to perform the process. 

How to port forward without router access? If you have forgotten the login password of your router or are far from the router, you may have this question when connecting with other computers. Port forwarding can be done without the router access too. We are going to describe some widely used methods below. 

Via the Network Connections

This is done with the network connections on your PC. Take a look at the stepwise guide.

  • Go to the control panel and select the network and sharing. 
  • You will see the linked devices and find your router there. Right-click on it and then go to properties.
  • Next, follow the settings. Then go to services and click on add option. Under this service tab, you can see the list of devices that are allowed to use for the newcomers via the port forwarding you are going to create.  
  • Then you will be directed to another interface where you will need to enter some details. You will have to use a name to identify the port forwarding. You are provided with a place to add the description. 
  • After that, you are asked to enter the IP address of your LAN. To find the IP address, click on the start menu and search on cmd. You will be shown a window in black and white. Then type ipconfig /all, and you will find the IPv4 address (Static internal IP address). It is your IP address. You can copy and paste on the place in the fort forwarding interface where you were asked to fill in the address.  
  • Then you will be asked to enter the port number
  • After that, you will need to fill in the same info in the TCP and UDP. The steps may vary according to the server you use. TCP and UDP will be enabled to utilize after you enter their addresses. 
  • Finally, click on OK.
  • If there is a mistake, you will be shown an error message; if not, you will be displayed with your previous screen. 

How to Enable UPnP to Perform the Port Forwarding Without Accessing the Router?

  • Universal Plug and Play (UPnP) are a collection of protocols used in networking. First, start by installing it on your pc. 
  • If you are the admin of your network, log into a router.
  • Then go to configuration.
  • Select network there, and you have to proceed with the basic settings
  • Now click on NAT.
  • Enable the UPnP.
  • Select manual for the port mapping. 
  • Fill in the relevant information and give the command to save. 
  • Now, you have to refresh the page once.
  • Then go to the External IP. Check whether all are saved as valid. 
  • When UPnP is enabled automatically, the ports will be opened. 

How to Port Forward Using an App?

There are many apps to purchase for this purpose. First, you will have to enable the UPnP on your host computer, and then you can select a method to proceed with the port forwarding suggested by the app you installed. It is crucial to choose a reliable app after checking the customer reviews when you purchase. 

How to Port Forward in a Windows 10 Without a Router?

  • Type network and internet on the search bar and go to network and sharing center.
  • Then you have to proceed with the manage network connections option.
  • You will see the local area connection and select properties there.
  • Then click on the sharing.
  • After that, enable the option allow other network users to connect.
  • Then you will be asked to fill the boxes with the necessary information like name, IP address, and the port needed to open.
  • Save the changes and close. 

Can You Port Forward Remotely?

Yes, Remote Desktop Port forwarding is available, and make your public IP address on the computer you want to allow entering. 

How Do I Manually Forward Ports?

This can be done with your router. Log into the router and go to the port forwarding tab. Then you will have to enter the IP address of the network, port numbers, and the preferred protocol. After that, click on save. 

Most routers have included the port forwarding option. If you do not have it, you will have to go for an accessible one. 


How to port forward without router access? This article will be a perfect guide if you have this question and need to know the described process. We have included several port forwarding methods here with a brief description of the process. 

 You May Also Like:

Why Is My Xfinity Router Blinking Orange? [SOLVED]

Why Miko 3 Not Connecting To WiFi and How To Solve It?

Leave a Reply

Your email address will not be published. Required fields are marked *